Nzxt phantom fan hookup, how data brings you better ad experiences
There are holes drilled on the bottom of the tray to easily mount SSDs.
The entire area is protected by the slide-out filter we discussed earlier. The slide-out plastic trays have rubber on the sides to help with 3.
The HDD cage itself is not removable or able to be rotated. This may be followed by a number, and there may be more than one header available, depending on your motherboard.
The panel is held in place by four small thumb screws, in one each corner. This will either be a four-pin or three-pin connector.
Along the right side, there are three cable management holes Nzxt phantom fan hookup rubber grommets and three smaller ones without grommets. There are plenty of tie down loops for securing the cables once routed behind the motherboard tray. The fan runs at RPM and a nearly inaudible 13 dBA, just as the other two included mm fans do.
The motherboard will be able to control fan speed, which is useful if you want to strike a balance between case temperature and the noise generated by the fans. We also use this information to show you ads for similar films you may like in the future.
The end of the cable will be marked for polarity. The H comes with a white cardboard box strapped to the inside of the case, just above the PSU shroud. Consult your motherboard manual to be sure.
Note the Smart Device at the top left of the photo, which gives you a single location to plug in your fans and RGB strips. The header on the motherboard is arranged by one row of five headers and another row of four, so one is missing from the corner.
Inside, there are plenty of interesting features to mention. Inside the box, you get a manual, an addendum to the manual, zip ties and an RGB lighting strip one is pre-installed.
Yahoo is now part of the Oath family.